Paradyne Digital Photo Frame 9783 Bedienungsanleitung PDF herunterladen (Seite 51)

Configuration Options

4-11

9783-A2-GB20-00

July 2000

Table 4-3. Service Level Verification Options (2 of 2)

SLV Timeout Clearing Event Threshold

Available Settings: 1, 2, 3, 4 . . . 20

Default Setting: 1

Specifies the number of consecutive SLV messages that must be received before the

DLCI Inactive status is cleared.

1 – 20 – Sets the limit for the clearing event.

SLV Packet Size (bytes)

Available Settings: 64 – 2048

Default Setting: 64

Sets the size of packets, in bytes, that will be used for SLV communications. SLV

packets are used to track latency and other SLV-related variables.

When the packet size is changed, a new round trip and average latency calculation

must be performed, so these measurements will not appear on the SLV Performance

Statistics screen until a new sampling interval has occurred.

64 – 2048 – Sets the packet size for SLV communications.

SLV Synchronization Role

Available Settings: Tributary, Controller, None

Default Setting: Tributary

Determines the role the unit plays in maintaining synchronization of user history data

collection and storage between FrameSaver devices.

Tributary – Uses network timing received from incoming SLV communications and

provides network-based synchronization information to other devices in the network.

Controller – Uses its own internal time-of-day clock and provides synchronization

information to other devices in the network based upon its own clock.

NOTE: Only one device in the network should be configured as the SLV

synchronization controller.

None – Incoming timing information is ignored and no timing information is sent out.

This setting should only be used when network synchronization is not desirable, or

when a single unit connects multiple networks or network segments.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 232 233

Keine Kommentare

Paradyne Digital Photo Frame 9783 Bedienungsanleitung Seite 51