Paradyne 4200 Bedienungsanleitung PDF herunterladen (Seite 297)

100

101

14. System Commands

4200-A2-GB20-00 August 2002

14-35

SET-SID

The SET-SID command sets the system identifier (SID) of a network element.

Response Format

If, in less than 2 seconds, a normal or error response cannot be sent, the following

acknowledgment response will be sent:

IP c

After the above response, a new command input may be generated.

Normal Response:

sid yy-mm-dd hh:mm:ss

M c COMPLD

/* SET-SID:[tid]::[ctag]::sid */

;

Error Response:

sid yy-mm-dd hh:mm:ss

M c DENY

/* SET-SID:[tid]::[ctag]::sid */;

errcde

;

Table 14-27. SET-SID Command Parameters

SET-SID:[tid]::[ctag]::sid;

RESTRICTIONS: All parameters in this command are position-defined.

[tid] The identification of the target NE. TID is optional and has a default

value of null. The NE's SID code is the only other valid value.

[ctag] The correlation tag that correlates an input command with its associated

output response(s). It is assigned by the originator of the command. The

value is limited to six characters, which may be an identifier or a decimal

numeral. It is optional with a default of 0.

sid System identifier. A text string of up to 16 characters that uniquely

identifies the NE.

1 2 ... 292 293 294 295 296 297 298 299 300 301 302 ... 381 382

Kommentare zu diesen Handbüchern

Keine Kommentare

Paradyne 4200 Bedienungsanleitung Seite 297

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Paradyne 4200